OPTIONS OPERATION
1- Make certain that all lifting cables are out of the
hopper area before the truck is moved into
position in front of the container.
2- Once the truck is in position, attach the cable
(2-10 reever) to the container.
3- Inspect the container’s TRUNNION to insure
that they are safely compatible with the
LOADMASTER’S Pivot Plates.
4- Secure
both
of the LOCKING ARMS around the
container’s TRUNNION. Make certain that both
locking arms are securely pinned before
attempting to lift the container.
5- Prior to moving the compaction blades (sweep
and slide), the container should be partially
lowered to eliminate the possibility that
garbage will become pinched between the
blade and the container lip. This could damage
the container.
6- Keep your body, arms, hands and fingers well
clear of the container trunnion bar and the
lifting mechanism during container dumping
operations.
BOTH CONTAINER LATCH ARMS MUST BE ENGAGED &
LOCKED ON THE CONTAINER AT ALL TIMES DURING
RAISING & LOWERING OF CONTAINER
STAND CLEAR OF ANY LIFTING MECHANISMS WHEN IN
OPERATION.
LIFT MECHANISMS HAVE PINCH POINTS THAT CAN
SERIOUSLY INJURE OR KILL YOU WHEN IN OPERATION.
Sec02-pg24
LATCH BOTH
SIDES BEFORE
RAISING ANY
CONTAINER!!!
To Next Page
Loading...