“STORING” A CABLE’s HOOK (CONT’D)
Never hook/ store the cable’ hook to the gate-side
Grab Handles (aka...”Hand Holds”).
WARNING! The human Hand could be severely
cut and/ or crushed by the powerful cable OR
cable’s hook... IF the cable’s hook is WRONGLY
hooked to the Grab Handles/ Hand holds.
Never hook the Cable Hook to the gate-side’s
mechanical linkages/ controls.
Never hook the Cable Hook to the gate-side Riding
Step.
Sec02-pg26
This is the Grab Handle
(aka...“Hand Hold”)...
NEVER (NEVER!) hook
the cable’s HOOK to either
sides hand-hold (left or
right)... only a Operator’s
“hands” are to “touch” the
Grab Handle(s) ..
These are the Gate side
mechanical Linkages/ Knobbed
Levers.. NEVER hook any
Cable’s HOOK to these Linkages/
controls
To Next Page
Loading...