ATTENTION:
1. The waste packages should be sorted and put into solid dustbins according to the
materials and be collected disposal by local special environment protection bureau.
To avoid pollution, it’s forbidden to throw away the wastes randomly.
2. To avoid leaking during the use of the products, the user should prepare some
absorbable materials (scraps of wooden or dry duster cloth) to absorb the leaking
oil in time. To avoid second pollution to the environment, the used absorbable
materials should be handed in to special departments in terms of local authorities.
Thank you for choosing our pallet truck. For your safety and correct
operation, please carefully read the manual before use.
NOTE: All of the information reported herein is based on data available at the time of printing. The
factory reserves the right to modify its own products at any time without notice or incurring in any
sanction. Please verify with the factory for possible updates.
1. GENERAL SPECIFICATIONS
Nylon or PU(Polyurethane)
Nylon or PU(Polyurethane) or Rubber
Special fork length are available 800, 900, 950, 1000, 1500, 2000mm.
Materials and specification are subject to change without notice.
2. TO ATTACH HANDLE TO PUMP UNIT
If you have purchased a wooden box of pallet truck, some assembly is required. Certainly, you
need some tools, a hammer, a pliers, a spanner, etc; and some parts, one axle with hole, two
elastic pins (Note one is in the axle), these parts are putted in a plastic bag, which is putted into
the draw-bar.
NOTE: The number of draw-bar and pump should be the same.
To Next Page
Loading...