EasyManua.ls Logo

Loc8tor Pet - Switching Loc8 tor On and Off; Adjusting Loc8 tor Volume; Usage Tips for Loc8 tor

Loc8tor Pet
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
www.loc8tor.co.ukwww.loc8tor.com
SWITCHING ON / OFF
ON
Hold in the right hand side button (see Button Guide) for 2 seconds.
The Loc8tor will bleep and all the lights ash.
Small status light will ash whilst on.
The Loc8tor will automatically power down after 45 seconds if left idle.
OFF
Hold in the right hand side button for 2 seconds. Loc8tor will beep and turn off.
Write on the sticky label provided which button is allocated to each Tag / item.
If a locate button is pressed with no Tag assigned to it an error tone will sound
and the status lights will blink rapidly. To register a Tag to this button, complete
the steps ‘REGISTER A TAG’.
Press in the left hand side button to select from three volume settings; Off, Low or High.
An audio beep will sound when pressed indicating the current volume level.
VOLUME
TIPS

Related product manuals