Need help?Do you have a question about the Lochinvar EcoShield SHW116-410CE and is the answer not in the manual?
General| Brand | Lochinvar |
|---|---|
| Model | EcoShield SHW116-410CE |
| Category | Water Heater |
| Language | English |
Provides step-by-step instructions on what to do if you detect a gas smell from the appliance.
Details the height, width, and other physical measurements for various EcoShield models.
Specifies minimum distances required around the appliance for safe installation and servicing.
Procedures for ensuring the gas system is leak-tight after installation and before commissioning.
Covers flue angles, risk of ice build-up, condensate clouds, and material compatibility.
Provides technical data for various flue types including diameters, temperatures, and lengths.
Specifies minimum distances for flue terminals from building openings and other features.
Critical warnings about flue system temperature, completeness, sealing, and jointing.
Details specifications for twin-pipe and concentric flue systems for C63 certified appliances.
Details voltage, frequency, fuse rating, and earthing requirements for the appliance.
Provides a comprehensive schematic of the internal wiring for troubleshooting and installation.
Illustrates the control logic and sequence of operation using a ladder diagram format.
Covers essential checks before initial lighting for safe and correct operation.
Details combustion figures and procedures for gas pressure adjustment and checks.
Instructions for setting the water storage and distribution temperatures via the user interface.
Step-by-step guide for converting the water heater from Natural Gas to LPG fuel.
Procedures for gas pressure adjustment and combustion checks when operating on LPG.
Table of specified CO2 and CO figures for LPG combustion.
General advice on keeping the appliance area clear and scheduling annual servicing.
Procedure for inspecting the burner flame picture at high and low firing rates.
Procedure for setting up a weekly 70°C pasteurisation cycle using installer and user menus.
Tables showing resistance values for temperature sensors at various temperatures for diagnosis.
A chart listing common faults, their causes, and corrective actions.
Lists error codes, their descriptions, and the recommended corrective actions.
Lists blocking codes and their potential causes or related issues.
Lists notification codes indicating operational limitations or required attention.
To Next Page