Locinox MAMMOTH User Manual

MAMMOTH
Manual - English
1. Introduction
Thank you for choosing a Locinox gatecloser! Please read the following
instructions carefully before mounting the Mammoth & Rhino to your swing
gate. Enclosed you will nd all relevant user information concerning the
Mammoth.
2. Package Contents
Please check if your package contains the following items:
Please contact your supplier should any of the above items be damaged or
missing.
1
Mammoth gatecloser
2
Rhino hinge
3
Allen keys 10 - 5 - 3
4
Cover cap
5
Hexplugs
6
Drilling templates
*TEMP-000013*
Doc. Nr.:
TEMP-000013
MAMMOTH
Ø 15 mm
Ø 5/8”
Ø 15 mm Ø 5/8”
140 mm - 5 - 1/2”
UP
20 mm
25/32”
UP
*TEMP-000012*
Doc. Nr.:
TEMP-000012
MAMMOTH
140 mm - 5 - 1/2”
Ø 15 mm Ø 5/8”
Ø 15 mm Ø 5/8”
20 mm
25/32”
40 mm - 1-9/16”
*TEMP-000014*
Doc. Nr.:
TEMP-000014
RHINO
20 mm
25/32”
RHINO
20 mm
25/32”
Doc. Nr.:
TEMP-000015
1
2
3
4
5
6
www.GateHardwareKing.com | (800) 878-7829

Locinox MAMMOTH Specifications

General

Opening Angle	110°
IP Rating	IP54
Closing Speed	Adjustable
Final Snap	Yes
Vandal-proof	Yes
Finish	Powder-coated
Opening Speed	Adjustable
Power Supply	230V
Material	Aluminum
Safety Features	Obstacle detection

Summary

Introduction and Package Contents

Package Contents

Lists all items included in the gatecloser package for user verification.

Dimensions and Gate Direction

Dimensions

Provides key measurement specifications for the gatecloser installation.

Orange Plug Installation Note

Instruction not to remove the orange plug before mounting for correct angle.

Choosing Gate Turning Direction

Guidance on deciding the gate's turning direction before profile preparation.

Profile Preparation and Installation

Profile Preparation for Gate Types

Details on preparing gate and post profiles for left and right hand doors using templates.

Mounting and Fixing Procedure

Drilling and Quick-Fix Installation

Instructions for drilling holes and tightening the Quick-Fix system for gate mounting.

Adjustments and Finalizing Installation

Speed and Final Snap Adjustment

Guidance on adjusting the closing speed and final snap of the gatecloser.

Force Adjustment Procedure

Instructions on how to adjust the closing force using the Allen key.

Finalizing the Installation

Testing Adjustments Before Completion

Ensuring final snap, speed, and force adjustments are tested before final assembly.