Need help?Do you have a question about the Lock Inspection Systems MET 30+ and is the answer not in the manual?
General| Brand | Lock Inspection Systems |
|---|---|
| Model | MET 30+ |
| Category | Metal Detector |
| Language | English |
Details the history of manual revisions, including dates and reasons for changes.
Covers compliance with Health and Safety at Work Act and general safety information.
Explains how metal detector sensitivity is governed by aperture size and spherical sensitivity.
Describes the detection envelope created by software for contaminant detection.
Details how product characteristics can affect detection signals and lower sensitivity.
Explains the VFD detector display and its associated keypad functions.
Guides through the initial test procedure using provided test samples.
Outlines the process for teaching the metal detector the characteristics of a specific product.
Details configuration of reject timer parameters for product rejection.
Describes the initial display and navigation upon powering on the unit.
Explains the different security levels and codes for accessing software functions.
Details functions accessible by the operator, including test, product selection, and printing.
Outlines functions available to supervisors, including test, product, print, and count clearing.
Describes functions and access for engineers, including system configuration and diagnostics.
Visual representation of the menu structure and navigation for the Met30+ 1f system.
Visual representation of the menu structure and navigation for the Met30+ 3f system.
Describes the procedure and expected outcomes of performing a sample test.
Provides guidance on checks and actions if the standard test sample is not detected.
Illustrates the typical process flow for executing a sample test.
Explains different printer output modes like "Printing on Event" and "Printing on Demand".
Details the types of reports generated by the printer, including reject, system, and test reports.
Provides visual diagrams for connecting printers via serial cables.
Describes the ADC screen for engineers/supervisors, showing detection parameters and graphics.
Explains how to view stored reports directly on the touch screen display.
Outlines the touch screen system menu navigation for the Met30+ 1f model.
Outlines the touch screen system menu navigation for the Met30+ 3f model.
Addresses common issues of false triggering and poor sensitivity with suggested solutions.
Provides troubleshooting steps for when the detector fails to detect a test sample.
Defines key terms used throughout the manual, such as Aperture, Sensitivity, and Product Effect.
To Next Page