CAUTION
To provide clarity to points in question the illustrations and photos appearing
in this manual are shown with covers and guards removed.
NEVER OPERATE THIS EQUIPMENT UNLESS ALL COVERS AND GUARDS
ARE IN PLACE.
SAFETY GUIDELINES
You are NOT ready to operate this equipment if you have not read and
understood all of the safety information in this manual.
!
WARNING
• Do not wear loose clothing, neckties, improper gloves, or jewelry while operating this machine. If
long sleeves must be worn, avoid loose cuffs or buttons, Tie back or contain long hair.
• Wear proper gloves to prevent lacerations caused by sharp edges of stock as it travels through
the forming operation.
• Never operate this equipment unless all covers and guards are properly installed.
• Be alert for loose, worn, or broken parts. Never operate this equipment unless it is in good
working condition.
• As the stock enters the guides and feeds into the rolls, a pinch point is created as the stock
advances. Keep hands clear of area and all pinch points.
• Always disconnect the main power supply power and install lock outs using a lockout / tagout
procedure when making adjustments or repairs.
• When transporting, take into consideration that the machine is top heavy and may suddenly tip
over.
• The machine is designed for fixed installations and is not intended for portability.
Remember that the information contained in this manual is only a portion of an adequate training
program. It must be coupled with specific instructions for your application along with full
information of national and local safety regulations that may apply.
LKF Pittsburgh 16 Gauge
shopRPMachine.com
To Next Page
Loading...