13
Offline time-
limited
password
Open the Lockin Home app → Tap G30
Keypad/Keypad Pro → Tap the key icon →
Tap the Plus icon → Select “Offline
Password”, then “Time Limited Password”
→ Enter the expiration date → Tap “Get
password” → Enter the password name →
Tap “Done”.
Use the password at least once within 24
hours when the password takes effect.
Otherwise, the password becomes invalid.
The password can also be issued offline.
Open the Lockin Home app → Tap G30
Keypad/Keypad Pro → Tap the key icon →
Tap the Plus icon → Select “Offline
Password”, then “Clearing Code” → Select
“Clear All” or “Clear One” → Tap “Get
clearing code” → Tap “Done”.
The clearing code can only be used to clear
one or all offline time-limited passwords. An
offline clearing code cannot be deleted. Its
validity period is consistent with that of the
cleared offline time-limited password.
The password can also be issued offline.
Open the Lockin Home app → Tap G30
Smart Lock → Slide the key button at the
bottom of the screen to the right.
When the Gateway is online, the lock can be
controlled remotely.
When your mobile phone is connected to the
lock via Bluetooth, the lock can be controlled
at close range.
Fingerprint
unlock (only
G30 Keypad
Pro)
Open the Lockin Home app → Tap G30
Keypad/Keypad Pro → Tap the key icon →
Select “Fingerprint” → Tap the Plus icon
→ Select the lock → Select a member →
Collect fingerprints → Tap Save.
It is best to collect the fingerprints of the
same finger at multiple angles, so that the
collected fingerprints are more complete,
enabling faster unlocking.
Auto lock (with
door sensor)
(A door sensor has been installed before
calibrating the lock.)
Open the Lockin Home app → Tap G30
Smart Lock → Tap “Settings” → Enable
Auto lock → Set any “Auto Lock Time”.
Door sensor refers to a sensor that allows the
lock to detect the magnetic field strength for
auto lock after the door is closed. When the
lock is calibrated after the door sensor has
been correctly installed, the lock enters the
With Door Sensor Mode.
If there is a door sensor, G30 Smart Lock will
automatically close if the specified “Auto
Lock Time” has elapsed after G30 Smart Lock
detects the magnetic field (after the door is
closed). An alarm will be triggered if the door
is not closed and not locked after the “Door
Open Alarm Time” has elapsed.
If there is no door sensor, G30 Smart Lock
will automatically close when the specified
“Auto Lock Time” has elapsed after it opens.
An alarm will be triggered if the door is not
locked when the “Door Open Alarm Time”
has elapsed.
Auto lock
(without door
sensor)
(No door sensor has been installed before
calibrating the lock.)
Open the Lockin Home app → Tap G30
Smart Lock → Tap “Settings” → Enable
Auto lock → Set any “Auto Lock Time”.
Temporarily
disable auto
lock
After enabling Auto lock, press G30 Smart
Lock button three times.
Restore to Auto Lock: Press G30 Smart Lock
button three times, or lock once.
To Next Page
Loading...