Lockly FLEX TOUCH - Adding a Fingerprint

9
Before placing the
interior assembly onto
the mounting plate,
ensure the thumb turn
is vertical.
Place the interior assem-
bly against the mounting
plate and make sure the
torque blade is inserted
to the thumb turn shaft.
Secure the interior
assembly to mounting
plate with 2 screws.
I
2X
I
Torque Blade Thumb turn shaft
Align torque blade with thumb
turn shaft, make sure both are in
the vertical position.
RESET
PROGRAM
RESET
PROGRAM
RESET
PROGRAM
INSTALLING NTERIOR ASSEMBLY (F)
Step 3 continued