Lockly FLEX TOUCH Installation Guide

8
INSTALLING NTERIOR ASSEMBLY (F)
Step 3 continued
NOTE: If you need to disconnect the cable,
make sure to press the snap tab to release the
plug before carefully pulling it out. Do not
force, as this may result in damaging the lock.
Plug into , match red
side of plug with red on
socket - insert tightly.
X
X
Y
Y
Plug the cable coming through mounting plate into the interior assem-
bly as shown. Tuck cable under eyelet hooks and route to the right on
interior assembly .
D
F
F

Lockly FLEX TOUCH Specifications

General

Brand	Lockly
Model	FLEX TOUCH
Category	Door locks
Language	English