Need help?Do you have a question about the Lockly ACCESS TOUCH PRO and is the answer not in the manual?
General| Type | Electronic |
|---|---|
| Connectivity | Wi-Fi, Bluetooth |
| Battery Life | Up to 12 months |
| Keypad | Yes |
| Keypad Type | Touchscreen |
| Voice Assistant Compatibility | Amazon Alexa, Google Assistant |
| Remote Access | Yes |
| Material | Zinc Alloy |
| Biometric Sensor | Yes |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Auto-Lock | Yes |
| Backup Key | Yes |
| Weather Resistance | Yes |
| Weight | 2.5 lbs |
| Power Source | Battery |
| Battery Type | AA |
| Security Features | 3D fingerprint sensor |
| Mobile App | Lockly App |
| Unlocking Methods | Fingerprint, PIN code, Mobile App, Physical Key |
| Fingerprint Capacity | 99 |
Details advanced fingerprint recognition, auto lock, battery backup, profile duplication, multi-door locking, and smart sync monitoring features.
Identifies the external components of the lock, including the Key Cylinder, Fingerprint Sensor, and 9V Battery Backup Socket.
Details the interior components of the lock, such as the Battery Cover, Battery Compartment, Reset/Program Buttons, and Thumbturn.
Guides users to maximize lock potential by using the Lockly AMZ app and reading the manual fully.
Provides instructions for pairing the smart lock with the Lockly mobile app using the activation code.
Explains how to reset the smart lock, covering procedures for when it's not connected to the app.
Informs users about low battery indicators, consequences, and how to use backup power to temporarily activate the lock.
Details the process of opening the battery compartment, installing new AA alkaline batteries, and re-syncing with the app.
Guides users on enrolling fingerprints via the Lockly AMZ app, including tips on acceptable patterns and finger selection.
Provides visual and textual guidance on correct finger placement for accurate and fast fingerprint recognition.
Offers practical tips for fingerprint enrollment and recognition, plus troubleshooting for poor scanning conditions.
Explains the process of removing registered fingerprints from the lock using the Lockly AMZ app, including confirmation steps.
Details how to add Wi-Fi capability to the lock for remote control and management through the Lockly AMZ App.
Describes the procedure for unlocking the door by placing a registered finger on the scanner and locking by pressing it.
Explains how to use the physical key included with the lock to securely lock and unlock the door.
Details the automatic Rain Mode feature that disables fingerprint sensors when water is detected to protect the lock.
Explains how to enable Welcome Mode via the Lockly AMZ app to temporarily disable auto-locking for easier access.
Covers troubleshooting links, auto-lock settings, 9V backup access, physical keys, and re-keying recommendations.
Provides essential DOs and DON'Ts for cleaning the lock's fingerprint reader and body, emphasizing safe materials.
Highlights critical safety instructions, including not disassembling the lock, proper tool use, and battery disposal guidelines.
To Next Page
