Lockly Secure Link+ WIFI-RF - Troubleshooting Your Secure Link+ Hub; Troubleshooting: No Indicator Light; Troubleshooting: Slow RED Light Flashing; Troubleshooting: Rapid GREEN Light Flashing

10
Congratulations! Your Secure Link
+
WIFI-RF
Hub is now set up.
Below are some quick information for troubleshooting.
No Indicator Light
Your Wi-Fi Hub has no power.
Check your the power supply.
Slow RED Light Flashing
Your Wi-Fi Hub has power. It’s
not connected to any wireless
network.
Rapid GREEN Light Flashing
Your Wi-Fi Hub is in setup mode.
Setup mode can be entered by
pressing the setup button for 2
seconds. Setup mode will last
approx 2 minutes.
Solid GREEN Light
Your Wi-Fi Hub is on and connect-
ed to an active 2.4 GHz wireless
network.