Need help?Do you have a question about the Lockly PGH200 and is the answer not in the manual?
The main component of the system, crucial for voice assistant features and live monitoring.
Optional but recommended for verifying door status and receiving notifications.
Power adapter for the Wi-Fi Hub, recommended for best performance.
Install within 10 feet and ensure a strong 2.4 GHz Wi-Fi signal for best performance.
Plug the hub into power and observe the slow flashing red LED indicating readiness.
Ensure your network emits a 2.4 GHz radio signal for the Wi-Fi Hub to connect.
Connect your phone to 2.4 GHz Wi-Fi, open the Lockly app, and select the Wi-Fi Hub to begin configuration.
Press the setup button for 3 seconds to enable rapid flashing red LED, then scan for the device in the app.
Enter your Wi-Fi password and select the correct LED status to establish connection.
Interpret LED status (No light, Slow, Rapid, Solid) for troubleshooting connection issues.
Optional sensor for door status verification and voice assistant integration, comprising two parts.
Avoid direct sunlight, high heat, metal objects, and place on upper corners away from children/pets.
Align arrows, maintain gap less than 3/4", peel tab, and secure with adhesive.
Device complies with Part 15; avoid harmful interference and accept all received interference.
Equipment tested for Class B limits; user encouraged to correct potential interference.
Contains chemicals known to cause cancer and birth defects; adhere to minimum safe distances.
To Next Page
General
