1. Setting up the
Secure Link Wi-Fi Hub
You should install the Secure Link Wi-Fi Hub after you have
successfully finished installation and set up of your Lockly™ Smart
Lock. Refer to your appropriate Lockly™ Smart Lock Installation
Guide and User Manual that came with the lock for reference.
The Secure Link Wi-Fi Hub (Part A) can be plugged into any
standard 5V 1A USB port or use the UL certified USB AC adapter
included in this box (recommended).
For best connectivity, the Secure Link Wi-Fi Hub must be installed
within 10 feet of your Lockly™ Smart Lock. You may experience
delayed or intermittent connectivity if the Secure Link Wi-Fi Hub is
installed further than 10 feet away from the Lockly™ Smart Lock.
Lockly™ Smart Lock
PGD728 Series Shown
as reference only
Secure Link Wi-Fi Hub
Part A Shown Above
as reference only
10 Feet
Distance Between
The Secure Link requires a strong wireless signal for optimal
performance. Make sure the Secure Link will be installed in a
location with a strong 2.4 Ghz wireless signal.
To Next Page
Loading...
