Congratulations!
Your Secure Link Wi-Fi Hub
is now set up.
Below are some quick information for troubleshooting.
No Indicator Light
Your Wi-Fi Hub has no power.
Check your the power supply.
Slow Flashing
Indicator Light
Your Wi-Fi Hub has power.
It’s not connected to any wireless network.
Rapid Flashing
Indicator Light
Your Wi-Fi Hub is in setup mode. Setup mode can be
entered by pressing the setup button for 2 seconds.
Setup mode will last approx 2 minutes.
Solid Indicator Light
Your Wi-Fi Hub is on and connected to an active
2.4 Ghz wireless network.
To Next Page
Loading...
