Lockly Secure Link+ WIFI-RF - Configuring Your Secure Link+ WIFI-RF Hub; Connect to 2.4 GHz Wi-Fi Network; Select Secure Link+ Hub in App

7
3. Configuring Your Secure Link
+
WIFI-RF Hub
First, make sure the smartphone you are using to add
the Wi-Fi Hub
is connected to your 2.4 GHz Wi-Fi Network.
Next, open your
LocklyPro App and select the main
menu
from the upper left corner. (Image shown with
iOS
demo). Once the menu opens go ahead select
“Set up a New Device”
Select the Secure
Link
+
WIFI-RF Hub
NEXT >