Plug the Secure Link Wi-Fi Hub into the 5V 1A USB AC adapter and plug the AC adapter to your
wall socket.
Once you have confirmed that your Secure Link Wi-Fi Hub is ready to connect to your lock,
open the Lockly App from your smartphone.
Make sure you are standing between the Wi-Fi
hub and Lockly smart lock
, then Add New Device and follow the on screen instructions.
USA Outlet Shown
A GREEN LED indicator light will flash slowly
to indicate that the Wi-Fi Hub is ready to
connect.
LED Indicator is located next
to the Setup Button
20
SECURE LINK WI-FI HUB SETUP
Step 10
continued
To Next Page
Loading...
