EasyManua.ls Logo

Lockly SMART SAFE - Page 9

Lockly SMART SAFE
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7SECTION 2.6
2.6 Changing The Battery
Under normal use, the Lockly battery will last up to a year. Please check battery levels regularly and
change your batteries when the low battery notification is issued. For best practice, always use new
batteries by a major brand.
Open the battery compartment cover and insert four (4) new AA alkaline batteries as shown.
- Make sure the batteries are oriented correctly by matching the orientation displayed.
- Replacing the batteries do not reset stored Access Codes.
- To see a list of recommended brands, please visit http://Lockly.com/battery
NOTICE
Press the snap to remove the battery cover.
Carefully take out the battery holder and disconnect from the terminal.
Make sure you DO NOT PULL the connection cable.
Remove and/or install new 4 x AA batteries according to +/- direction.
Connect the battery holder to the terminal cable and return inside the battery box.
Return the battery cover.
1
2
3
4
- AA +
3
1
2
4
Whenever batteries are replaced, reconnecting Smart Safe to your smartphone
app is required.
If you have not yet downloaded the app, visit: Lockly.com/app