LOCKLY APP & UNIQUE ACTIVATION CODE
Before setting up Vision Connect Hub download the Lockly app on your smartphone. It’s
required to finish and setup the connection between hub and lock.
Scan, visit app store, or go to Lockly.com/app
Without the QR code you will
not be able to reset your lock.
14
Step 7
Additionally, you'll need the Activation Card
with unique pre-paired QR code to your lock.
The card is located in the packaging that your
lock came in. This QR code can also be found at
the bottom of Vision Connect Hub. Please keep
it in a safe place—this QR code is required to
complete the setup and will be required if you
lose your smartphone or access code.
ACC20221223
Activation Card
SAVE
Need help? Email: help@Lockly.com | Support: +1(669) 500-8835
To Next Page
