LockMaster SFG 18H - User Manual

www.WholesaleGateOpener.com
Rev 11a

Summary

General Safety

Important Safety Instructions

Safety Instructions for Installation

Guidelines for installing the gate opener safely, including gate suitability and access.

Preparation for Installation

Installation of the Opener

Connecting of the control board

1. Motor

2. Start Capacitor

3. Limit Switches

Setting of the Control Board

1. DIP Switches

Configuring motor running time in midway mode using DIP switches 1 and 2.

DIP Switch #1-#2: Running time of the motor in Midway Mode

DIP Switch #3-#4: Auto close time of the gate operator

DIP Switch #5: Left;Right open

2. Potentiometers

Adjusting OPEN and CLOSE stall forces using potentiometers A and B.

Test the reversing sensitivity

How to learn or erase the remote

How to use the remote to control the operator

Troubleshooting

1. Motor only runs toward one direction.

Troubleshooting motor operation issues when it only moves in one direction.

2. The gate does not open or close.

Diagnosing and resolving issues where the gate fails to open or close.

3. Remote control does not work.

Resolving problems with remote control functionality, including range and programming.

4. When you open or close the gate by pressing key #1 and key #2 which have been programmed, gate will stop in mid-travel or reverse before reaching the fully limit position.

Addressing gate stopping or reversing mid-travel due to force or obstruction.

5. The gate opens, but stops and will not return.

6. The gate can open, but fails to close.

7. The motor runs but the gate doesnt move.

Maintenance

LockMaster SFG 18H Specifications

General

Brand	LockMaster
Model	SFG 18H
Category	Gate Opener
Language	English