Need help?Do you have a question about the LockMaster LM902 and is the answer not in the manual?
General instructions and warnings for safe gate opener installation.
Focuses on separating pedestrian access and ensuring vehicle safety.
Guidelines for installing safety sensors and control units.
Lists the technical specifications of the gate opener, including power, speed, and dimensions.
Details the key features and functionalities of the gate opener system.
Determining the pivot bracket position for proper distance and alignment.
Attaching the gate opener to bracket assemblies using clevis pins and hairpin clips.
Inserting gate opener power cables into the control box strain relief.
Step-by-step guide for wiring Gate Opener 1 to the terminal block.
Step-by-step guide for wiring Gate Opener 2 to the terminal block.
Introduces control board settings and initial setup procedures.
Provides detailed steps for adjusting limit switches on gate arms.
Instructions on operating the gate using the remote control.
Troubleshooting power, running, and movement problems with the gate opener.
Addressing issues with gate stopping, closing failures, and limit switches.
Configuring the system for single or dual gate operation.
Defining which gate acts as the master and which as the slave.
Setting the stall force for gate openers 1 and 2.
Configuring photocell safety and automatic closing features.
Programming remote controls to operate the gate opener system.
General| Model | LM902 |
|---|---|
| Operating Temperature | -20°C to +55°C (-4°F to 131°F) |
| Protection Class | IP44 |
| Opening Speed | 12 seconds |
| Closing Speed | 12 seconds |
| Type | Gate Opener |
| Operating Voltage | 24V DC |
| Remote Control Range | 30 m |
| Motor Type | DC Motor |
To Next Page
