LOCO COOKERS SmartTemp LCG3ST3C36

Questions and Answers

S
Sara MoralesAug 21, 2025
What to do if there is a sudden drop in gas flow on my LOCO COOKERS SmartTemp LCG3ST3C36 Griddle?
- Y
  yangnicoleAug 22, 2025
  If you experience a sudden drop in gas flow or reduced flame height on your LOCO COOKERS Griddle, the LP tank might be empty and needs to be refilled at an authorized dealer, exchanged, or replaced with a new filled LP tank. Alternatively, the Overfill Protection Device (OPD) on the LP tank may have been activated. To resolve this, turn the control knobs to OFF, wait 30 seconds, and then relight the griddle. If the flames remain too low, reset the OPD by turning all control knobs and the LP tank valve OFF, disconnecting the regulator from the LP tank, waiting at least one minute, and then reconnecting the regulator to the LP tank and fully opening the LP tank valve.
M
michelle20Aug 25, 2025
What to do if the burner won't light with a match on my LOCO COOKERS SmartTemp LCG3ST3C36?
- N
  naveryAug 25, 2025
  If the burner on your LOCO COOKERS Griddle won't light with a match, first ensure the LP tank valve is open by turning it counterclockwise and that the regulator is properly attached to the LP tank. Also, check that the regulator coupling nut is fully tightened on the LP tank valve. The LP tank may also be empty, requiring a refill at an authorized dealer or replacement with a new filled LP tank. Check for any obstructions of gas flow by cleaning the burner tubes and inspecting for bent or kinked gas hoses. Ensure the burner is properly engaged with the valve, and clean the burner ports if they are clogged or blocked.
H
Heather KimAug 26, 2025
Why do the flames keep going out on my LOCO COOKERS SmartTemp LCG3ST3C36?
- B
  Beth HouseAug 26, 2025
  If the flames on your LOCO COOKERS Griddle are going out, it could be due to high or gusting winds; avoid using the griddle in such conditions. Another cause could be that the LP tank is empty, so refill it at an authorized dealer or exchange it for a new one. Alternatively, the Overfill Protection Device (OPD) on the LP tank may have been activated/tripped. Refer to the 'Sudden drop in gas flow or reduced flame height' section for instructions on how to resolve this.
K
kristin54Aug 28, 2025
How to fix an irregular flame pattern on my LOCO COOKERS Griddle?
- W
  wallacejamesAug 28, 2025
  If the flame pattern on your LOCO COOKERS Griddle is irregular and doesn't run the full length of the burner, the burner ports may be clogged or blocked. Clean the burner ports to resolve this issue.
J
Jason WarrenAug 30, 2025
Why is the flame yellow or orange on my LOCO COOKERS Griddle?
- B
  Brett LopezAug 30, 2025
  If the flame on your LOCO COOKERS Griddle is yellow or orange, it could be due to several reasons. If it's a new burner, residual manufacturing oils may be present; light the griddle and burn it on SEAR for 15 minutes. Another cause might be an obstruction of gas flow, so clean the burner tubes and check for any bent or kinked gas hoses. Grease or food residue on the burner can also cause this issue, so clean the burner thoroughly. Finally, ensure proper alignment and engagement of the burner to the valve.
K
Kelly CarlsonSep 1, 2025
How to adjust my LOCO COOKERS SmartTemp LCG3ST3C36 Griddle for proper grease drainage?
- B
  bmooreSep 1, 2025
  If excess grease collects on the griddle surface of your LOCO COOKERS Griddle while cooking, the cooktop may not be properly adjusted for grease drainage. Use the included wrench to rotate the cooktop feet, raising or lowering the cooktop until grease flows toward the drain.
E
Earl CarrollSep 3, 2025
What causes flare-ups on my LOCO COOKERS SmartTemp LCG3ST3C36?
- T
  Tammy DownsSep 3, 2025
  A flare-up on your LOCO COOKERS Griddle can be caused by grease buildup, so clean all parts to remove excess grease. It can also occur due to excess fat in the meat; trim excess fat before cooking. Finally, the cooking temperature might be too high; adjust to a lower temperature.
Q
qjordanSep 5, 2025
What to do about a persistent grease fire on my LOCO COOKERS Griddle?
- K
  kpatelSep 5, 2025
  If you experience a persistent grease fire on your LOCO COOKERS Griddle, turn all control knobs and the LP gas tank valve to OFF. Allow the grease fire to burn out and the griddle to cool. Then, clean all parts of excess grease and food buildup, which may be trapping the grease around the burner system.
G
Grace StewartSep 8, 2025
Why is my LOCO COOKERS SmartTemp LCG3ST3C36 surface rusting or dull?
- S
  Steven SchwartzSep 8, 2025
  If the surface of your LOCO COOKERS Griddle has started to rust, this is normal with use. Follow the instructions in the manual to refurbish and season the griddle surface. If the griddle surface appears dull, it has likely gotten too hot and is no longer seasoned. Follow the instructions in the manual to refurbish and season the griddle surface.
R
Rachel ParkSep 10, 2025
What causes a flashback in my LOCO COOKERS SmartTemp LCG3ST3C36?
- H
  Holly LiSep 10, 2025
  If you experience a flashback (fire in the burner tube) on your LOCO COOKERS Griddle, the burner tube may be blocked. Clean the burner tube to resolve this issue.

Summary

Safety Symbols and General Warnings

Understanding Safety Symbols

Explains the meaning of DANGER, WARNING, and CAUTION symbols.

Crucial Safety Precautions

Lists essential safety rules regarding flammable liquids and fire safety.

General Safety Warnings

Installation and Usage Restrictions

Covers local codes, electrical grounding, outdoor use, and clearance requirements.

Safe Operation Practices

Emphasizes unattended use, moving the appliance, and personal safety.

Operational Safety Warnings

Proximity and Handling Precautions

Warns about proximity, splashing liquids, and handling cooking surfaces.

Electrical and Component Safety

Covers cord safety, GFI circuits, and burner adjustments.

LP Tank Safety and Handling

LP Tank Storage and Transportation

Provides guidelines for storing and transporting LP tanks safely.

LP Tank Specifications

Details required specifications for LP gas cylinders used with the appliance.

LP Tank Components and Safety Features

Required LP Tank Features

Lists essential components like relief valves and OPD devices.

Valve Outlet Safety

Warns against inserting objects into the LP tank valve outlet.

Parts Diagram

Component Identification

Visual representation of all parts with numbered labels for identification.

Parts List

Detailed Parts Inventory

Lists all parts with their corresponding quantities and descriptions.

Hardware and Tools

Fastener Specifications

Details screw types, quantities, and required tools for assembly.

Assembly Requirements

Notes the need for two people and specific tools for assembly.

Assembly Instructions: Base and Side Panels

Attaching Wheels and Base

Instructions for attaching casters and the cart base.

Installing Side Cart Panels

Details the process of attaching the left and right side panels.

Assembly Instructions: Rear and Shelf Supports

Mounting the Rear Cart Panel

Guides on installing the back panel of the cart.

Installing Tank Exclusion Shelf Supports

Instructions for attaching the legs for the tank exclusion shelf.

Assembly Instructions: Shelves and Magnets

Installing Tank Exclusion Shelves

Steps for installing the tank exclusion shelves into the cart.

Attaching Door Magnets and Braces

Instructions for mounting door magnets and cart braces.

Assembly Instructions: Doors and Handles

Attaching Door Handles

Guides on attaching the door handles to the cart doors.

Mounting Cart Doors

Steps for attaching the left and right cart doors.

Assembly Instructions: Grease Chute and Knobs

Installing Grease Chute

Instructions for attaching the grease chute.

Installing Control Knobs

Guides on attaching the control knobs to the griddle.

Assembly Instructions: Cooktop and Accessories

Attaching Cooktop Locking Feet

Steps for screwing the cooktop locking feet into the cooktop.

Installing Power Cord Storage

Guides on installing the power cord storage tray and port.

Assembly Instructions: Side Shelves

Attaching Side Shelf Brackets

Instructions for attaching the brackets for the side shelves.

Mounting Side Shelves

Guides on how to attach and position the side shelves.

Assembly Instructions: Trash Bag Rack and Shelves

Installing Trash Bag Rack Supports

Steps for attaching the supports for the trash bag rack.

Attaching Trash Bag Rack

Guides on how to mount the trash bag rack.

Assembly Instructions: LP Tank Installation

Connecting LP Tank

Instructions for securing the LP tank and connecting the regulator.

Tank Retention Screw Installation

Details on tightening the tank retention screw for security.

Leak Testing Procedure

Connecting Regulator to LP Tank

Step-by-step guide for connecting the regulator to the LP tank.

Performing the Leak Test

Instructions on how to apply soapy solution to check for leaks.

Operation: Plugging In and Initial Startup

Confirming Valve and Knob Positions

Ensures all knobs and valves are in the correct OFF position before plugging in.

Connecting Power Cord

Guides on inserting and plugging the power cord into a GFI outlet.

Operation: Lighting the Griddle

Match Lighting Procedure

Detailed steps for lighting the burners using a match.

SureSpark Ignitor Lighting

Instructions for using the built-in ignitor to light the burners.

Setting Cooking Temperature

Explains how to set desired temperatures and the dual cycling process.

Operation: Fire Safety and Shutdown

Managing Flare-Ups and Grease Fires

Advice on preventing and handling flare-ups and grease fires.

Shutdown and Disconnection Procedures

Steps for safely shutting down the appliance and disconnecting the LP tank.

Special Features: Cooking Zones and Grease Management

Three Separate Cooking Areas

Explains the distinct low, medium, and high heat zones.

Integrated Grease Management System

Details how adjustable feet and grease tray manage grease flow.

Special Features: Racks and Storage

Paper Towel Rack Functionality

Describes the paper towel rack's mounting and usage.

Trash Bag Rack and Power Cord Storage

Explains the trash bag rack and the power cord storage drawer.

Care and Maintenance: Griddle Seasoning

Seasoning Your Griddle (First Time)

Step-by-step guide for initial seasoning to prevent rust.

Seasoning After Every Use

Routine seasoning process to maintain a non-stick surface after each use.

Care and Maintenance: Cleaning and Flame Check

General Cleaning Procedures

Guidelines for cleaning the appliance, including safety precautions.

Burner Flame Quality Check

How to check for correct blue flame for optimal heating.

Care and Maintenance: Burner Service

Burner Removal and Cleaning

Detailed steps for removing, cleaning, and inspecting burners.

Reassembling Burners

Instructions on how to properly reassemble burners and electrodes.

Care and Maintenance: Storage

Storing Your Griddle

Guidelines for storing the griddle indoors or outdoors.

Troubleshooting: Ignition Issues

Burner Fails to Light with Ignitor

Possible causes and solutions for ignitor failure.

Burner Fails to Light with Match

Troubleshooting steps when a match is used for lighting.

Troubleshooting: Flame and Fire Issues

Sudden Drop in Gas Flow or Flame Height

Solutions for issues with gas flow and flame height.

Persistent Grease Fire and Flare-Ups

Guidance on handling grease fires and flare-ups.

Troubleshooting: Grease and Error Codes

Excess Grease Collection on Surface

Solutions for excess grease collection during cooking.

Understanding Error Codes

Explains specific error codes and their associated solutions.

Warranty Information

Product Warranty Coverage

Details the warranty period, coverage, and exclusions.

FCC Compliance Statement

Information regarding FCC rules and compliance for the device.