Loepfe WeftMaster CUT-iT - Table of Contents

Contents
Contents
1 General Information 7
1.1 About this Document 7
1.2 Validity 7
1.3 Design features 7
2 Safety 8
2.1 Safety Information and Warnings 8
2.1.1 Symbols used 8
2.2 Intended Use 9
2.3 Target group 10
2.3.1 Authorized personnel 10
2.4 General safety information 10
2.5 Safety Concept 11
2.5.1 Fire prevention measures 12
2.5.2 Safety precautions when using heat cutters 13
2.5.3 Electrostatic sensitive components 14
3 Product and Function 15
3.1 Product description 15
3.1.1 Control unit 15
3.1.2 Heat cutter / cutting wire 16
3.2 Scope of Delivery 18
4 Operation 19
4.1 Operating elements 19
4.2 Function buttons 20
4.3 Advanced functions 21
4.3.1 Changing system parameters 21
4.3.2 Resetting program settings and system parameters to standard values 28
4.3.3 Hardware reset 29
5 Installation 30
5.1 Safety Information 30
5.2 Position of control unit mounting holes 31
5.3 Wiring 32
5.3.1 120 V AC / 240 V AC power supply 32
5.3.2 120 V AC / 240 V AC wiring 33
5.3.3 Connecting the heat cutters 34
5.3.4 Control unit / weaving machine connection 36
5.4 Specifying the heat cutter type 36
5.5 Master/Slave function 37
5.6 Specifying Master/Slave addresses 39
5.6.1 Specifying the Master address (without Slave) 39
5.6.2 Specifying the Master address (with Slave) 40
WeftMaster CUT-iT Dornier
www.loepfe.com 5