Need help?Do you have a question about the Loepfe WeftMaster CUT-iT and is the answer not in the manual?
Guidance on reading the manual before device operation and keeping it accessible.
States the document's validity for the WeftMaster CUT-IT.
Explains the visual elements and symbols used in the manual for clarity.
Explains hazard levels indicated by DANGER, WARNING, CAUTION, and NOTE signals.
Details warning signs including general, electrical voltage, and hot surfaces.
Specifies the device's purpose for fusible textiles and warns against improper use.
Defines authorized personnel qualified to operate the device, including operator, electrician, and technician roles.
Provides general instructions for safe operation, documentation, warnings, and installation procedures.
Describes the device's safety concept for protecting persons and property from hazards.
Outlines measures to prevent fire risks associated with hot heat cutters.
Details precautions for safe use of heat cutters to prevent fire and burns.
Explains the device's function for separating and melting selvedges of fusible textiles.
Describes the control unit's role in managing electrical current to the heat cutter.
Lists the components included in the standard delivery and optional items.
Identifies and illustrates the main operating elements of the device, including the display and buttons.
Details the functions of individual buttons (Esc, Select/Enter, Prog, Test) for device operation.
Covers fundamental operations like powering on and off, and initial startup sequences.
Step-by-step guide on connecting the device to power and the initial startup messages displayed.
Explains how to safely switch off the device and its implications for the emergency relay and weaving machine.
Explains the different modes the device operates in, such as Off, Standby, Boost, and Run.
Describes how to activate and use the test mode for device functionality checks.
Instructions on how to save and select operational programs for different wire types and settings.
Detailed steps for setting the standby and run current strengths for the heat cutters.
Lists and explains various system settings that can be displayed and adjusted.
Guide on how to adjust the display contrast during the device's startup phase.
Lists common warning messages displayed by the device and their corresponding actions.
Details error codes, their causes, and the recommended troubleshooting steps.
Guidelines for the proper disposal of electronic components as hazardous waste.
To Next Page
General