Product and Function
WeftMaster CUT-iT
www.loepfe.com 13
3 Product and Function
3.1 Product description
The device is used to separate and melt selvedges of fusible textiles (synthetic or hybrid fabrics) on
weaving machines, especially to separate and melt fabric selvedges or to separate fabrics into strips.
The device can be fitted with various heat cutters. Heat cutter selection depends on fabric material
processing, material transport speed as well as filling and warp densities.
3.1.1 Control unit
The control unit controls the electrical current through the cutting wires of the heat cutter fitted on a
weaving machine. The current strength depends on whether the weaving machine is running or idle.
WeftMaster CUT-iT control unit
1 Display
2 Function buttons
To Next Page
Loading...