Loepfe WeftMaster CUT-iT - Table of Contents

Contents
Contents
1 General Information 7
1.1 About this Document 7
1.2 Validity 7
1.3 Design features 7
2 Safety 8
2.1 Safety Information and Warnings 8
2.1.1 Explanation of Symbols 8
2.2 Intended Use 9
2.3 Target group 10
2.3.1 Authorized personnel 10
2.4 General safety information 10
2.5 Safety Concept 11
2.5.1 Fire prevention measures 11
2.5.2 Safety precautions when using heat cutters 12
3 Product and Function 13
3.1 Product description 13
3.1.1 Control unit 13
3.2 Scope of Delivery 14
4 Operation 15
4.1 Operating elements 15
4.2 Function buttons 16
4.3 Basic functions 16
4.3.1 Putting the device into operation 16
4.3.2 Switching the device off 18
4.3.3 Putting the device into operation 18
4.3.4 Current flow modes 18
4.3.5 Test mode 19
4.3.6 Select Program 20
4.3.7 Setting the current strength 21
4.4 Advanced functions 23
4.4.1 System settings 23
4.4.2 Setting the display contrast 24
5 Troubleshooting 25
5.1 Warnings 25
5.2 Error messages 26
6 Disposal 27
6.1 Hazardous waste 27
WeftMaster CUT-iT
www.loepfe.com 5