Loewe Individual Sound Projector User Manual (English)

Other manuals for Loewe Individual Sound Projector

Questions and Answers:

A
Andrew LeeAug 19, 2025
Why is there no sound coming from my Loewe Speaker System?
- D
  David OwensAug 19, 2025
  If your Loewe Speaker System produces no sound, first ensure that all input or output cables are properly connected. If the problem continues, the cables may be faulty. Next, verify that a suitable input source is selected using AUX (PIP) or SOURCE. Also, check that the volume isn't set to the minimum and that the mute function is not active. Press V + on the remote control to restore audio output and adjust the volume. Finally, ensure the unit can process the signal being transmitted from the source component; if you are using PCM signals with a sampling frequency of over 96 kHz, try a different signal source.
M
Megan NashAug 21, 2025
What to do if my Loewe Speaker System suddenly switches to standby?
- C
  Carl DunnAug 21, 2025
  If your Loewe Speaker System suddenly switches to standby, it's likely due to the internal temperature being too high, which activates a protective circuit to prevent overheating. Wait approximately one hour for the unit to cool down before switching it on again.
A
Ashley RodriguezAug 23, 2025
Why is there noise interference from my Loewe Individual Sound Projector without a subwoofer?
- M
  Matthew KelleyAug 25, 2025
  If you are getting noise interference and no subwoofer is connected to your Loewe Speaker System, try reducing the volume. This issue may occur if the protective circuit is active because a source with strong bass elements is being played.
W
wongmichelleAug 26, 2025
Why is there no sound from the effect channels on my Loewe Individual Sound Projector?
- S
  Steve DiazAug 26, 2025
  If you're not getting any sound from the effect channels on your Loewe Speaker System, you may be trying to play back the signal source or the program in stereo. Press one of the sound field program buttons on the remote control to select a multi-channel playback mode and try again to play back the signal source or the program.
D
Debra PetersAug 27, 2025
What does ERROR E-6 mean on Loewe Individual Sound Projector Speaker System and how to fix it?
- B
  Benjamin LoweAug 28, 2025
  If ERROR E-6 appears on your Loewe Speaker System, it means that the optimization microphone cannot receive the noise produced by the unit because the noise output level is too low. Ensure that the optimization microphone is firmly connected to the unit and has been set up properly.
L
Lynn BurnsAug 30, 2025
What does ERROR E-1 mean on Loewe Speaker System and how to fix it?
- D
  Derek LeeAug 30, 2025
  If you see ERROR E-1 on your Loewe Speaker System, it means your listening room has too much unwanted noise. Ensure that it is as quiet as possible in your listening room and choose a time of day when there is less noise outside.
M
Mary HamiltonSep 1, 2025
What does ERROR E-5 mean on Loewe Individual Sound Projector Speaker System and how to fix it?
- G
  George QuinnSep 1, 2025
  If you see ERROR E-5 on your Loewe Speaker System, it means that the optimization microphone is not positioned at the right distance from the unit. Ensure that the optimization microphone is more than 1.8 m from the front of the unit and is within 1 m of the average height of the unit.
C
Christopher KnightSep 3, 2025
What does ERROR E-4 mean on Loewe Speaker System and how to fix it?
- B
  brownandreSep 3, 2025
  If you see ERROR E-4 on your Loewe Speaker System, it means that the optimization microphone is not in front of the unit. Ensure that the optimization microphone is positioned in front of this unit.
M
Michelle HarrellSep 5, 2025
What does ERROR E-2 mean on Loewe Individual Sound Projector Speaker System and how to fix it?
- C
  Curtis PhamSep 5, 2025
  If you see ERROR E-2 on your Loewe Speaker System, it means that the optimization microphone was disconnected during auto set-up. Ensure that the optimization microphone is firmly connected to the unit.
G
Gloria CalhounSep 7, 2025
Why does the on-screen dialogue (OSD) not appear on my Loewe Individual Sound Projector Speaker System?
- D
  derrick47Sep 7, 2025
  If the on-screen dialogue (OSD) does not appear on your Loewe Speaker System, connect the socket VIDEO OUT (Composite) on this unit to the input sockets on your TV set. This issue occurs when the VIDEO OUT (Composite) socket on the unit is not connected to the input sockets on your TV set.