qualified technician , who will proceed with the
replacement of the thermostat as necessary.
y Stationary appliances not fitted with means for
disconnection from the supply mains having a
contact separation in all poles that provide full
disconnection under overvoltage category III,
the instructions state that means for
disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules
y Warning: Ensure that the appliance is
switched off before replacing the lamp to avoid
the possibility of electric shock (see “Replacing
the light bulb”)
y To clean the appliance, refer to the
corresponding chapter in this manual.
This instruction manual is also available on the
website www.lofra.it
1. INSTALLATION
Installation, regulation, transformation and maintenance procedures must be done by
qualified personnel in accordance to this manual and laws in force. The company will not
be liable for any type of damage derived from improper voltage or other misuse,
abnormal service or handling and alterations or modifications in design or construction..
This appliance has been designed to be fitted in a standard housing unit of about 600mm
in width. The housing unit and the adjacent furniture must be able of withstanding heat up
to 150° C. Additionally, make sure the adjacent furniture’s doors don’t interfere with the
oven.
To Next Page
Loading...
