WARNING
• Check that the electrical system meets the requirements shown on the data plate of the
appliance.
1.1 CHOOSING A LOCATION FOR YOUR OVEN
The unit can be fitted either underneath a work surface or in a column unit.
Fitting measurements are shown in the pictures below..
Ovens door need to be fitted using 4 screws
Don’t lever against the oven door during the installation process.
Put the oven inside the furniture and open the door.
Insert four self-threading burnished screws for wood with washer salvo-enamel edge in
four holes of diameter 9mm from the front.
Close the oven door.
To Next Page
Loading...
