To Next PageTo Next Page
Need help?Do you have a question about the Logan 201 and is the answer not in the manual?
Components for setting the width of oval or circle cuts.
Parts that guide and adjust the cutting head for shape accuracy.
Key components for centering and securing the mat during cutting.
Controls for blade depth adjustment and securing the blade.
Alignment guides on the base for precise positioning.
Advice on blade condition and when to replace it for optimal cuts.
Adjusting scales for oval width, oval difference, and circle diameter.
Drawing crosshair lines and using a slip sheet for accurate cutting.
Detailed instructions on rotating the scale arm and using the stepping lever for cuts.
Advice on applying pressure and avoiding interference for optimal cuts.
Solutions for blade insertion, alignment, breakage, incomplete cuts, and lever skipping.
Adjusting the scale arm block to set the desired oval or circle width.
Calculating oval difference and adjusting scales for precise shape settings.
Drawing crosshair lines on the mat to guide the cutting process.
Aligning the cutter base with drawn lines and securing it for cutting.
General
