11
You can select or de-select any device by clicking on its row and following four (4) new options which will appear on top menu bar if any device is selected:
Edit: By clicking on "Edit" you will access to "Device’s attributes" page where you can adjust your device’s parameters as follows:
• On/Off: By turning off your device you can suspend sending alarms and notifications from your device.
Note: In case you do not want to receive any notifications, you can switch your device to "Off" mode in “Device attributes”. Your device continues to record and upload even in off mode.
• Title: You can change the device's name appearing in your devices list and dashboard and assign a name to temperature and RH sensor separately.
• Reading dimension: You can change the reading dimension for each sensor of your device according to your preference (If applicable). Like °C or °F for temperature.
To Next Page
Loading...