LogiCO2 FJ-SW2401000N User Manual

User’s Manual
O
2
Safety System
NOTE 1: Always test your set, BEFORE INSTALLATION!
The different sets are delivered pre-connected in the package.
Be aware! During the test a very loud sound will be emitted from the horn.
The test procedure is described in chapter 3.1 in this manual.
NOTE 2: Remember to perform a startup calibration when the system is installed.
The calibration procedure is described in chapter 4 in this manual.
English

LogiCO2 FJ-SW2401000N Specifications

General

Power Source	External Power Adapter
Alarm Type	Audible and Visual
Sensor Type	NDIR
Operating Humidity	0 to 95% RH (non-condensing)
Certifications	CE