LogiCO2 O2 - User Manual

User’s Manual
O
2
Safety System
NOTE 1: Always test your set, BEFORE INSTALLATION!
The different sets are delivered pre-connected in the package.
Be aware! During the test a very loud sound will be emitted from the horn.
The test procedure is described in chapter 3.1 in this manual.
NOTE 2: Remember to perform a startup calibration when the system is installed.
The calibration procedure is described in chapter 4 in this manual.
English

LogiCO2 O2 Specifications

General

Sensor Technology	Electrochemical
Measurement Range	0-25% O2
Operating Humidity	15% to 90% RH (non-condensing)
Alarm Levels	Adjustable
Display	LCD
Power Source	Battery
Battery Type	AA
Weight	200 g (7 oz)