LogiCO2 O2 - Warranty

31
14. Warranty
Warranty Policy
LogiCO2 warrants to the Purchaser of the O2 Safety System equipment for two years from the
installation date that said equipment shall be free from any defects in workmanship and materials.
Purchaser agrees that as a pre condition to any LogiCO2 liability hereunder, Purchaser or its appointed
agents shall fully inspect all goods immediately upon delivery and shall give LogiCO2 written notice of
any claim or defect within ten (10) days after discovery of such defect.
As a further pre condition to any LogiCO2 liability about hereunder, both parts replacement and labour
must be supplied by an approved LogiCO2 service company. LogiCO2 may elect to repair or replace
such equipment or any defective component or part thereof which proves to be defective, or to refund
the purchase price paid by the original Purchaser. LogiCO2 shall not be liable for defects caused
by the effects of normal wear and tear, erosion, corrosion, fire, explosion, misuse, or unauthorized
modification. Alterations or repair by others than those designated and approved by LogiCO2 or
operation of such equipment in a manner inconsistent with LogiCO2 accepted practices and all
operating instructions, unless pre authorized in writing by LogiCO2, shall void this Warranty.
LogiCO2’s sole and exclusive liability under this Warranty is to the Purchaser and shall not exceed
the lesser of the cost of repair, cost of replacement, or refund of the net purchase price paid by
the original Purchaser. LogiCO2 is not liable for any losses (including O2), damages, or costs of
delays, including incidental or consequential damages. LogiCO2 specifically makes no warranties
or guarantees, expressed or implied, including the warranties of merchantability or fitness for a
particular purpose or use, other than those warrantied expressed herein.
Warranty Claims Procedure
All warranty claims must be previously authorized by: LogiCO2 / electronic approval may be obtained
by contacting: E-mail info@logico2.com.
Authorization must be obtained from LogiCO2 prior to shipping any equipment to LogiCO2 facilities.
The customer returning the goods is responsible for all freight, proper packing, and any damage
incurred during shipment of the goods back to LogiCO2.
IMPORTANT
All persons responsible for the use and maintenance of this equipment must read and understand the
safety and operating information contained in this guide. Installation and service of this equipment
should be performed only by professionals. The function of the equipment will be impaired if it is not
properly installed.
Important information regarding third party products
The functionality of LogiCO2’s products are only warranted if connected to LogiCO2’s systems and
products. LogiCO2 is not liable for the functionality of any systems if LogiCO2 components or parts
are connected to third party products. LogiCO2 permits its products to be connected to external
relays controlling ventilation and valves as well as fire alarm panels and building management
systems.
Subject to typographical errors and change without prior notice.