EasyManua.ls Logo

LogiCO2 O2 - Installation Record

LogiCO2 O2
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Checklist Mk9 Sensor 2, Specifications
Sensor serial number (normally written on a sticker on the side of the sensor housing).
O2 Value on sensor %
Checklist Mk9 Sensor 2 YES NO
Is the green diode ON?
Is the yellow diode ON?
Is the red diode ON?
Is the horn/strobe mounted at a height of 2.0-2.4 m/80-96 inches so that the staff
can see it without any obstructions in the way?
Is there a O2 warning sign mounted next to the horn/strobe, with a telephone
number to the service provider?
Is the O2 warning sign next to the horn/strobe mounted in a permanent way?
Is a horn/strobe installed above the sensor at a height of 2.0-2.4 m/80-96 inches?
Is there a O2 warning sign mounted next to the horn/strobe?
Is this O2 warning sign, next to the horn/strobe, mounted in a permanent way?
13.5 Installation Record
The two year warranty as of the date of installation is only valid when this form has been completed.
Installing company:
Name of installer:
The LogiCO2 O2 Safety System has
been properly installed and tested
by an authorized person. Operation
instructions have been provided by:
Date:
Signature/installation company:
Signature/user:

Related product manuals