EasyManua.ls Logo

LOGICOM LUNAR - SIM and MicroSD Card Insertion; Battery Charging Instructions

LOGICOM LUNAR
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
2. Inserting a SIM card.
Your smartphone is a dual SIM mobile phone, which allows you to use two
phone lines on the same smartphone. Your smartphone has two SIM ports
(1 and 2). To insert the SIM card(s):
Switch off the phone and remove the back cover.
Insert the SIM card correctly into the SIM card slot. Make sure that the
cards are inserted in the correct direction.
SIM 1 uses a Nano-SIM card and SIM 2 uses a Nano-SIM card.
Then replace the SIM compartment.
3. Inserting a MicroSD card (not supplied)
It is possible to increase the internal memory of the device with a MicroSD
card. (not supplied) (MicroSD card of 64GB maximum).
Switch off the phone and remove the back cover.
Insert the SD card correctly into the SD card slot.
Then put the back cover of the smartphone back on.
CAUTION: Only use the battery supplied with your smartphone
Model: 476391P (Li-ion 3,85V 5000mAh)
To replace a battery, please contact your dealer's service department.
Charging the battery:

Related product manuals