EasyManua.ls Logo

LOGICOM LUNAR - Smartphone Usage Guide

LOGICOM LUNAR
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
To charge the battery, plug the USB cable (supplied) into the USB port
on your smartphone. Then connect the cable to a USB port or an AC
adapter (not supplied) to a power outlet.
The battery charge icon lights up during charging to indicate the
charging status. If the temperature of the battery exceeds 45°C, the
battery can no longer be charged.
When the battery is fully charged, you can remove the USB cable from
the device.
IMPORTANT:
The smartphone is charged only via its US-C port.
Make sure your smartphone battery is completely empty before
charging it for the first time.
The battery should be charged for at least 5 to 8 hours on the first
charge.
After being stored for a prolonged period, it may be necessary to charge
and empty the battery several times for maximum performance.
Note: You can use the device while it is charging. The battery
may then take longer to fully charge.
4. Use of the smartphone
If you have any questions about the use of your smartphone, please contact
us at the following address:
https://support.google.com/android

Related product manuals