Preparation Before Use
1. To connect the hose, insert the hose
connector into the hose connection
opening until you hear a click.
2. To connect the telescopic tube to the
handgrip of the hose, insert the narrow
section into the wider section.
3. Extend the telescopic tube to a length
you nd most comfortable by pushing
the button forward. The button is on the
telescopic tube. Connect a nozzle / brush
suitable for the oor type to be cleaned.
4. The hard oor brush can be used with
the brush lowered or raised. You may also
connect the nozzle to vacuum corners,
slots or grooves.
Make sure the dustbag and the dustbag holder are fully inserted, otherwise you
will not be able to close the vacuum cleaner’s cover.
27
GB
L18BVR13E_7L_130515_Shaun.indb 27 15/05/2013 5:16 PM
To Next Page
Loading...