Logik L21CS10 - Convection Cooking (with Preheating)

17
Convection Cooking (with Preheating)
1. Press the CONVECTION button to choose the
temperature of convection.
2. “
“ will light. “110”, ”120”....”190” and “200” will
be displayed in cycle.
3. Press the START button to start preheating.
When the preset temperature is reached, the
buzzer will sound twice and the temperature
setting will flash.
4. At this stage press the STOP/CLEAR button
once, open the door and place your food
inside. Close the door.
The microwave will keep operating
preheat for 5 minutes. If you do not press
the STOP/CLEAR button within 5 minutes
the microwave will return to Standby
mode.
5. Input the convection time by pressing the
number buttons. The maximum time can be
set is 99 minutes and 99 seconds.
6. Press the START button to work. “
“ will
flash. Time counts down. During this process,
second figures count down too. If you press
the STOP/CLEAR button, the unit stops
working. If you press the CONVECTION
button, you check the status and the
temperature will be displayed for 3 seconds,
then time counts down.
7. When work finish, the buzzer will sound five
times and turn back to the waiting states.
4, 6
3, 6
1, 6
5
L21CS10_IB_GB_100927_Zell.indd 17 27/09/2010 3:49 PM