16
Connecting a Coaxial Audio Receiver Using an Audio Cable
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable to connect the TV’s COAX
Audio Out output socket to an external audio
receiver’s audio coaxial input socket.
2. Plug the connected devices into the mains socket
before switching on the TV.
3. Press the STANDBY button on the front right side
panel of the TV or the
button on the remote
control to turn on your TV.
4. Press the SOURCE button on the front right side
panel of the TV or on the remote control to display
the Source List. Use the
buttons to select any
desired input source and then press the OK button to
confirm.
The TV’s volume control will have no
effect. You may control the audio level via
the Audio Receiver.
Rear Right Side View of TV
COAX
Audio Out
AERIAL IN
USB
HDMI CI CARD IN
Audio Cable
(not included)
Audio Receiver
Connecting Headphones
Connect your headphones to the TV’s socket.
Before putting on the headphones, turn the volume
down then put the headphones on and slowly
increase the volume until you reach a comfortable
listening level.
Long-term exposure to loud music may
cause hearing damage. It is best to avoid
extreme volume when using headphones,
especially for extended periods.
Rear Right Side View of TV
COAX
Audio Out
AERIAL IN
USB
HDMI CI CARD IN
Earphones Cable
(not included)
L22FEDN_P_R_W12_IB_120402_Annie.indd 16 12年4月2日 下午3:16
To Next Page
Loading...
Need help?
General
