43
2. Press the
buttons to select Time Settings and then press the OK
button or the
button to enter Time Settings menu.
Setup
OSD Language
Audio Language
Subtitle
Teletext
Blue Screen
Mode Setting
MENU: Return EXIT: Exit
English
On
Home Mode
Time Settings
HDMI CEC Control
Move OK: Select
3. Press the buttons to select the following options, and then press
buttons to adjust each option’s setting or OK button to select the
options.
Time Settings
OSD Timer
Sleep Timer
MENU: Return EXIT: Exit
10 seconds
Off
Auto Standby
4 hours
Time Zone
Time
Move Adjust
OSD Timer You can select a time that your on-screen menus will be displayed: 10 / 20 / 30 / 60 seconds /
Off. If you select Off the menu will remain on the screen until you press a button to remove it.
Sleep Timer The sleep timer automatically switches the TV to standby after the preset time has elapsed. The
clock will be set automatically when receiving a digital signal. Time must be set before using Sleep
Timer function.
Selects a period of time after which the TV automatically switches to standby mode: OFF / 5 / 15 /
… / 120 / 240 min. The timer begins to count down from the number of minutes selected.
If you turn the TV off after setting the sleep timer, the sleep timer setting will be
erased.
Auto Standby The unit will automatically switch to standby mode 4 hours after the last time the remote control
was used. A reminder screen will pop up and count down before the unit switches to standby
mode.
If you want to operate the TV for a long period of time, turn off the auto standby function.
To save energy you should always turn the auto standby function back to "3 hours", " 4 hours" or
"5 hours".
Time Zone When you select a Time Zone city, the TV time is set by the time offset information based on Time
Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is
set automatically by a digital signal.
Time Allows to set the time and date manually or set
automatically when receiving a digital signal.
Press the
buttons to highlight TIME, then
press the OK button or the
button to enter the
sub-menu.
Selects Auto Sync to On, the time and date will
be set from the broadcast signal.
If you want to set the time and date manually,
set Auto Sync to OFF. Then press the
buttons to highlight the Date and Time options
and press the 0-9 buttons or the
buttons to
set the date and time.
4. Press the MENU button to return to the previous menu, press again to
return to the main menu.
5. Press the EXIT button to exit the menu.
Time
Auto Sync
Date
MENU: Return EXIT: Exit
On
03 Apr 2015
Time
01:53:42
Move Adjust
To Next Page
Loading...
Need help?
General
