18
Problem Solution
The unit does not
respond when
pressing any buttons.
The unit may freeze up during use. Switch the unit off and then
on again at the mains socket to reset the unit.
No sound output
from the main unit
• Make sure that the unit is not muted. Press the button or the
VOL+/– Button to resume normal listening.
In AUDIO IN mode,
the unit sometimes
switches back to
standby mode
automatically
• When the unit’s external input signal level is too low, or is idle
for approximately 15 minutes, it will automatically switch to
Standby mode. Use your TV remote to increase the TV input
audio level, or increase the volume level of your external input
device.
When using either of
the digital input, if
there is no audio
• While in Coaxial mode, if there is no sound output from the
unit and the COAXIAL indicator ashes, activate the PCM
Signal output of your source device (e.g. TV, game console, DVD
player, etc.).
• Connect your source device (e.g. Blu-ray) directly to the unit.
If any functional abnormality is encountered, unplug the unit from the mains
socket and reconnect it again.
L32SBT17_IB_Final180629V4.indd 18 29/6/2018 10:33 AM
To Next Page
Loading...
Need help?
General
