13
Secondary Services
You may see a “>” symbol after the name of the station, this indicates that there are secondary
services available to that station. These secondary services contain extra services that are
related to the primary station. e.g. a sports station may want to add extra commentaries. The
secondary services are inserted directly after the primary station in the station list.
To select the secondary station, press the TUNE/SELECT button when the “<” appears in the
display before the station name. When the secondary service ends, the unit will automatically
switch back to the primary station.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can help you when
aligning your aerial or when adding stations that were missed while auto tuning.
1. Press the MENU button and then press the TUNE/
SELECT button to select Manual tune, the display will
now show Manual tune.
2. Turn the VOLUME/SELECT control to cycle through
the DAB channels, which are numbered from 5A to 13F.
3. After your desired channel number is selected,
press the TUNE/SELECT button to enter the current
multiplex, the top line will now display the rst station
in the multiplex.
4. Press the TUNE/SELECT button to select a station that
you would like to listen to.
Storing Stations
You can store up to 10 of your favourite stations to the memory. This will enable you to access
your favourite stations quickly and easily.
1. To store a preset, you must rst be listening to the station that you would like to save,
press and hold the PRESETS button. The “Empty preset #” will show on the display and
the preset number will ash.
2. Turn the VOLUME/SELECT control to select your desired preset station number and then
press the TUNE/SELECT button to conrm.
3. The station will be stored and the screen will then show “Preset # Saved“.
Recalling a Stored Station
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
the PRESETS button.
2. Turn the VOLUME/SELECT control to select your desired preset station number.
3. Press the TUNE/SELECT button to conrm the selection.
4. If you choose a preset that hasn’t been allocated a station, the “Empty preset #“ will be
displayed.
L55DAB10_IB_110810_Zell.indd 13 10/08/2011 10:44 AM
To Next Page
Loading...
Need help?
General
