19
Cleaning the radio
Ensure the unit is fully unplugged from the mains socket before cleaning.
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Symptom Suggestion
No power. • Check that the AC adapter is connected and plugged
into a power socket.
• When battery powered, the batteries may be
exhausted. Try a fresh set.
Poor radio reception. • The signal may be weak. Try re-positioning the aerial. If
this doesn’t work check the radio in a dierent location.
Avoid placing the radio near computers and other
electronic equipment.
No radio information text. • The signal may be too weak to receive information text.
• Not all stations broadcast information text.
No response to the controls • Disconnect AC power and remove batteries when
tted. Wait 10 seconds. Re-connect AC power or re-t
the batteries.
Maintenance
Troubleshooting
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• The speaker grille can be cleaned carefully with a soft paintbrush or similar.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
LDABXRW13_IB_V6.indd 19 26/06/2014 17:29
To Next Page
Loading...
Need help?
General
