EasyManuals Logo

Logik LDW45S10 User Manual

Logik LDW45S10
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
GB-9
Before UseOperationSpecificationSafety Warnings
Cleaning and Maintenance
Adding of Salt
If the water in your area is hard, deposits will form on your dishes and
utensils. As such, this appliance contains a salt reservoir for you to reduce
the hardness of the water.
Please follow the steps below to pour the salt into the salt reservoir and to
correspond to the water hardness level in your area.
1. Remove the lower basket and unscrew the reservoir cap.
2. Fill the reservoir with approximately 500ml of water (first use only).
3. Place the funnel provided over the salt reservoir. Pour in approximately
1.2kg of dishwasher salt depending on the brand used.
4. Clean any excess salt from around the reservoir opening and then
screw the cap on again firmly.
5. Run the "Rapid" wash programme immediately (without any crockery
in the dishwasher) to remove any traces of salt from the compartment.
• The salt refill warning indicator on the control panel will illuminate
when the reservoir is running out of sale and requires refilling.
• The salt refill warning indicator will cease to illuminate within a
few days, depending on how quickly the salt dissolves.
• If you select to use detergent tablet, you do not need to add rinse
aid into the rinse aid reservoir.
Adjusting of Salt Consumption
To optimise and customise the level of salt consumption, please follow the
steps below to adjust the salt consumption.
1. Remove the lower basket and unscrew the reservoir cap.
2. There is an arrow-shaped indicator in the reservoir, which allows you
to turn. You may turn it to the "-" or "+" settings based on the water
hardness in your area.
It is recommended that adjustments should be made in accordance with
the following chart.
WATER HARDNESS
Selector
Position
Salt Consumption
(gram/cycle)
Auto nomy
(cycle/1.2kg)
˚dh ˚fh ˚Clark mmol/l
0-8 0-14 0-10 0-1.4 / 0 /
8-22 14-39 10-28 1.4-3.9 - 20 60
22-45 39-80 28-56 3.9-8 Mid 40 30
>45 >80 >56 >8 + 60 20
• 1 ˚dh (German degree) = 1.25mmol/l
• 1 ˚fh (French degree) = 0.178mmol/l
• 1 ˚Clark (British degree) = 1.78mmol/l
OPEN
Open
Open
Open
Turn
Logik LDW45S10_IB_100324.indd 9 3/24/10 3:24 PM

Other manuals for Logik LDW45S10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LDW45S10 and is the answer not in the manual?

Logik LDW45S10 Specifications

General IconGeneral
BrandLogik
ModelLDW45S10
CategoryDishwasher
LanguageEnglish

Related product manuals