EasyManuals Logo

Logik LDW45W12N User Manual

Logik LDW45W12N
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
39
GB
Spray Arms
Particles of food can get stuck in the spray arm jets and
bearings. The spray arms should therefore be checked and
cleaned regularly.
Ensure the dishwasher is switched off. Use a pointed object,
e.g. a cocktail stick, to loosen food particles in the spray arms’
jets.
Frost Precaution
Avoid placing the dishwasher in a location where the temperature can get below 0˚C. If your appliance is
left in an unheated place over the winter, you are advised to:
1. Disconnect the unit from the water inlet.
2. Turn on the unit. Select any washing cycle and let it run for 1 minute only. This drains out all the
excessive water that remains in the unit.
3. Disconnect from the mains socket.
4. Empty the dishwasher.
5. Close the dishwashers door.
6. Disconnect the unit from the water drain. Use a suitable receptacle to catch any residual water in the
pipes.
Should you encounter any difficulties with the above steps, please ask a service technician for assistance.
Maintenance After a Prolonged Period of
Non-Operation
If you are not going to use the unit for a prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains socket.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any
residual water in the pipes.
3. Slightly open the door to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.
Moving the Dishwasher
If you have to move the unit, for instance due to moving house, you are advised to:
1. Disconnect the dishwasher from the mains socket.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any
residual water in the pipes.
3. Remove the dishwasher from the current location with the hoses discharged.
4. Pull the unit out together with the hoses.
Do not attempt to remove the spray arms.
Avoid over tilting the unit during transportation.
We recommend that 2 people handle the dishwasher during installation.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LDW45W12N and is the answer not in the manual?

Logik LDW45W12N Specifications

General IconGeneral
BrandLogik
ModelLDW45W12N
CategoryDishwasher
LanguageEnglish

Related product manuals