Location
When selecting a position for your dishwasher you
should make sure the installation surface is flat
and firm, and the room is well ventilated. Avoid
locating your dishwasher near a heat source, e.g.
cooker, boiler or radiator. Extreme cold ambient
temperatures may also cause the appliance not to
perform properly. This dishwasher is not designed
for use in a garage or outdoor installation.
Do not drape the dishwasher with any covering.
When installing, ensure that free space is left at the
sides.
2. Ensure there is clearance each side of the unit
to allow slight sideways movement for servicing
when required. If required, the worktop of the
dishwasher can be removed. The height without
the worktop is 820 mm. The figure outlines the
minimum dimensions required to accommodate
the dishwasher within fitted kitchen furniture
units.
Installation
Power
Delay
Start
1/2 Load
3in1 Inten Normal Eco 1 Hour Glass Rapid
3
in
1
595
540
820
80
100
units in mm
All parts removed must be saved to do
the reinstallation in the future. Ensure
the dishwasher is unplugged and empty.
We recommend that 2 people handle the
dishwasher during installation.
To Next Page
Loading...
Need help?
General
