EasyManuals Logo

Logik LFC50S12 User Manual

Logik LFC50S12
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Operation
Switching On Your Unit
1. Connect the mains cable to the mains socket. The
internal temperature of your unit is controlled by
a thermostat. There are seven settings, of which
position 7 is the coldest and position OFF turns
the unit off.
2. Adjust the thermostat control dial to the desired
position, bear in mind that the higher the
number, the lower the temperature. Position 4
is the recommended setting when operating at
normal room temperature (between 16°C and
32°C).
3. The unit may not operate at the correct
temperature if it is in a particularly hot or a
particularly cold room, or if you open the doors
often.
4. To ensure that the unit is cool enough to
sufficiently chill and freeze your food, wait 24
hours before filling it with food.
5. If you are concerned that your unit is not
being kept cold enough and wish to check the
temperature, you will need a special fridge/
freezer thermometer. These are available from
most supermarkets and hardware shops.
Place the thermometer in the centre of either
the fridge or freezer compartment and leave
overnight. The correct temperature for the fridge
compartment should be an average of 5°C. The
correct temperature for the freezer compartment
should be -18°C or lower.
Adjusting the Temperature
The internal temperature of the unit is controlled by a thermostat. The recommended position
is between 1 to 4 for colder working environments (i.e. during winter) and between 5 to 7 for
hotter environments. Please adjust according to the environment.
Noises Inside the Unit!
You may notice that your unit makes some unusual noises. Most of these are perfectly normal,
but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has
become more pronounced since the introduction of CFC free gases. This is not a fault and will
not affect the performance of your unit. This is the compressor motor working, as it pumps the
refrigerant around the system.
5
4
6
11
LFC50S_W12_IB_Running Change_121209_Annie.indd 11 12年12月9日 下午6:31

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LFC50S12 and is the answer not in the manual?

Logik LFC50S12 Specifications

General IconGeneral
BrandLogik
ModelLFC50S12
CategoryRefrigerator
LanguageEnglish

Related product manuals