2. Remove the 2 screws on the back.
3. Lift the top cover away from the fridge.
4. Remove the three screws, then remove
the upper hinge that hold the door in
place. Lift the upper door and place it
on a padded surface to prevent it from
scratching.
5. Move the bottom bushing and bottom
bushing cap of the upper door to the
other side. The bottom bushing key must
be in the correct position to allow it to be
inserted correctly.
2. Remove the 2 screw covers first, then
undo the screws underneath.
If there’s a door limiter stop, add it
in.
To Next Page
Loading...
Need help?
General
